Product photo 1 - hero shot of the purifier beside a lit LEGO display

Photo 2 - front / display screen

Photo 3 - filter pulled out

Photo 4 - in a display room

Photo 5 - size next to a set

CleanMyBricks Air

The display room air purifier that catches dust before it lands on your sets.

★★★★★

Built on H13 True HEPA. ETL, CB and RoHS certified.

$299.99

$399.00

Save $99

Free spare H13 filter included with launch orders.

Most dust on your sets was airborne first. This pulls 350 cubic metres of air through a medical grade H13 filter every hour, so it never gets the chance to settle.

Add to cart

30 day happiness guarantee. 1 year warranty.

What you get today: the CleanMyBricks Air unit, a fitted H13 True HEPA and carbon filter, plus a free spare filter so your first replacement is already covered.

  • ✓

    Captures 99.95% of particles down to 0.3 microns, the size dust actually floats at.

  • ✓

    Covers display rooms from 24 to 42 square metres.

  • ✓

    Auto mode reads the air and sets its own speed. Sleep mode runs quiet overnight.

  • ✓

    Touch panel and remote. Live air quality reading on the front.

The real problem

You are not really cleaning your sets. You are cleaning the air that landed on them.

Every speck of dust on a display spent hours floating before it settled. Wipe a set today and the same air fills it back in by next week. Do that every weekend and you spend around seventeen hours a year dusting sets that were never the source.

Take the dust out of the air first, and it stops arriving on the bricks.

The numbers

One filter change of air, over and over, all day.

350 m³/h

Clean air delivery rate. 197 CFM of filtered air an hour.

99.95%

Of particles down to 0.3 microns, captured by H13 True HEPA.

~7 /hour

Full changes of air in a typical display room, every hour.

55 dB

At full speed. Quieter than that on sleep mode.

Three stages of filtration

A nylon pre-filter, H13 True HEPA, then activated carbon.

Large particles and hair are caught at the pre-filter. The H13 HEPA traps 99.95% of everything down to 0.3 microns, the range that household dust, pollen and pet dander float in. Activated carbon takes on odours and airborne gases behind it.

H13 True HEPA

Activated carbon

Washable pre-filter

Photo 6 - the three-stage filter, exploded or pulled out

Photo 7 - close-up of the display screen showing air reading

Set it and leave it

Auto mode reads the room and runs itself.

A built in sensor tracks the air and shows a live reading on the front panel. In auto mode the fan speeds up when the air needs it and drops back when it is clean, so the room stays clear without you touching it. Three manual fan speeds and a timer are there when you want them.

Live air quality display

Auto mode

Timer

Quiet enough to forget

Sleep mode you can leave on overnight.

The whole point of a purifier is that it runs while you are not thinking about it. At full speed it measures 55 decibels. Sleep mode drops it well below that and dims the panel, so it holds the air overnight without keeping you up.

Sleep mode

Touch control

Remote included

Photo 8 - unit running on a shelf at night, panel dimmed

How it works

Three steps, then it takes over.

Place it in the room

Set it near your displays and plug it in. It draws air in from every side through the perforated body.

Switch to auto

The sensor reads the air and picks the fan speed. You watch the number on the front drop as it clears.

Leave it running

It keeps changing the air about seven times an hour. Dust that never lands is dust you never wipe.

Specifications

Every number, in one place.

Clean air delivery (CADR)

350 m³/h · 197 CFM

Filtration

H13 True HEPA + carbon + pre-filter

Particle capture

99.95% to 0.3 microns

Coverage

24 to 42 m² · 260 to 450 sq ft

Fan speeds

3, plus auto and sleep

Air quality sensor

Yes, with live display

Noise (max)

55 dB

Power

35 W

Controls

Touch panel + remote

Dimensions

257 × 253 × 490 mm

Weight

4 kg

Warranty

1 year. Certified ETL, CB, RoHS

In the box

Ready to run out of the carton.

✓ CleanMyBricks Air unit

✓ Fitted H13 True HEPA and carbon filter

✓ Free spare H13 filter (launch offer)

✓ Remote control

✓ Power adapter for your plug type

✓ Quick start guide

Try it in your own display room.

Run it for 30 days. If the air in the room is not cleaner and your sets are not staying that way, tell us and we will make it right. Every unit is backed by a full one year warranty on top.

Questions

The things people ask first.

Does it actually stop my sets getting dusty?

Most household dust is airborne before it settles. By changing the air in the room about seven times an hour through an H13 filter, the purifier removes those particles while they are still floating, so far fewer of them ever reach your bricks. It reduces how fast dust builds up. It is not a force field, so an occasional light wipe is still worth it, just far less often.

What size room does it cover?

It is rated for rooms from 24 to 42 square metres, which is 260 to 450 square feet. In a typical display room it changes the full volume of air about seven times an hour. In a larger space it still filters continuously, it simply cycles the air fewer times.

How often do I replace the filter?

Every 6 to 8 months in normal use. Launch orders ship with a free spare filter, so your first replacement is already covered. The unit reminds you when it is time.

Is it loud?

At full speed it measures 55 decibels. Sleep mode runs it quieter and dims the display, so most owners leave it on overnight without noticing it.

How long until it arrives?

Orders ship within 7 to 14 working days. You will get tracking as soon as it is on its way.

Keep the air clean

Stop cleaning dust. Start removing it.

The dust on your displays landed out of the air. Take it out of the air, and it stops arriving on the bricks.

$299.99

$399.00

Save $99 + free spare filter

Add to cart

30 day guarantee. 1 year warranty. Ships in 7 to 14 working days.

CleanMyBricks Air. H13 True HEPA display room air purifier. Certified ETL, CB, RoHS.