CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier
CleanMyBricks Air — Display Room Air Purifier

CleanMyBricks Air — Display Room Air Purifier

Regular price $399.00 Sale price $279.99


You're not really cleaning your sets. You're cleaning the air that landed on them.

Every speck on your shelves spent hours floating before it settled. Skin cells, fibres off the sofa, dust drifting in from outside. It hangs in the air, it comes down, and it works its way into the gaps between studs where nothing reaches it easily.

Which is why the shelf you cleaned last month already needs doing again. The dust was never on the shelf. It was in the room.

What the weekly clean actually costs you

Twenty minutes on one display, once a week, is about seventeen hours a year. And it is not the twenty minutes that wears you down. It is knowing that by the time you finish the last shelf, the first one has already started over.

You can keep removing dust after it lands. Or you can stop most of it landing.

Catch it while it's still in the air

The CleanMyBricks Air runs in the corner of the room and pulls 350 cubic metres of air through a medical grade H13 filter every hour. In a normal display room that is about seven full changes of air, every hour. Airborne particles end up in the filter instead of on your models.

What changes is not whether you clean. It is how long it takes and how hard you have to work. Less settles between cleans, and what does settle sits loose on the surface instead of being worked into the detail. A pass with a cloth, rather than an evening with a brush.

Three stages, pulled from the top

Air is drawn in through the top of the unit and pulled down through three layers. A nylon pre-filter catches the big stuff first: hair, lint and fibres. The H13 True HEPA traps 99.95% of particles down to 0.3 microns, comfortably below the size that settles on your sets, so what goes into the filter does not come back out. Behind it, activated carbon takes on odours and the stale, shut-up smell a closed display room can get.

See the air at a glance

A light glows inside the handle and changes colour with the air in the room. Green means clean. Amber and red tell you when it is working harder. No app to open, you just look across the room.

Quiet enough that you'll leave it on

A purifier you can hear is a purifier you will switch off, and a switched off purifier does nothing at all. On sleep mode the CleanMyBricks Air runs at 35 decibels, quieter than the room it sits in, and dims its display so it holds the air overnight without keeping you up. Three fan speeds, a sleep mode, and an auto mode that reads the air and sets its own pace. Run the timer in bursts after a build session, or leave it on low all day.

A scent for the room, if you want one

A pull-out aroma tray sits in the side. Add five or six drops of essential oil to the pad and the whole display room carries a scent you choose. Oil goes in the aroma tray only, never into any other opening.

Where to put it

Floor level, near the shelving, with about a foot of clearance around it. Dust settles downward, so a unit at floor height beside your display intercepts more of it than one across the room on a desk.

Specification

  • CADR: 350 m³/h (197 CFM)
  • Coverage: 24 to 42 m² (260 to 450 sq ft)
  • Filtration: H13 True HEPA, activated carbon, nylon pre-filter
  • Air quality: built-in sensor with a colour light in the handle
  • Fan speeds: 3, plus sleep and auto modes
  • Noise: 35 dB on sleep, 55 dB at full speed
  • Timer: yes (2, 4 and 8 hours)
  • Control: touch panel
  • Aromatherapy: pull-out aroma tray
  • Power: 35 W
  • Size: 257 × 253 × 490 mm
  • Weight: 4 kg
  • Certification: ETL, CB, RoHS
  • Warranty: 1 year

Filters

Replace roughly every 6 to 8 months depending on how much the room is used. Replacement filters are available, so the unit does not become landfill when the first one fills up.

Compatible with LEGO® sets. Not made by, endorsed by, or affiliated with the LEGO Group. LEGO set not included.

HAPPINESS GUARANTEED:
Our #1 priority here is your happiness. Which means we stand by our product 100%, no matter what, no questions asked, no holds barred, no ifs, no ands, no buts. If you have a problem, we will solve it. Refund it. Send you new replacements for free. Whatever it takes. Just reach out to our Customer Happiness Team. We’re here for you. Happiness. Guaranteed.

You may also like